|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
|
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
diyAudio Member
Join Date: Dec 2005
Location: Ohio
|
I fixed the amp and then it broke with a day again. Can't find the anwser this time i belive my subs are shot and that was the orignal problem.
Now my issue is the amp is drawing too much power. when it turns on it clicks and flashes the green power led rapidly. Then it blows a 10amp curent limter in the B+ line. I think it has to do with the chip that the driver's are on becasue the traces where bad so i had to add some wires to connect them. Any know if u can buy just the chip? think its call an smtp |
|
|
|
#2 |
|
diyAudio Member
Join Date: Nov 2003
Location: Louisiana
|
Did you replace the driver transistors?
Are you sure that you have the jumpers routed properly? Is the driver board in a socket or is it soldered to the main board? Can you post some good quality images of the repaired areas?
__________________
Links >> Basic Car Audio Amp Repair * Basic Car Audio Electronics * New Site * Basic Switching Power Supply Design * Basic Computer Skills << Links |
|
![]() |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 1000D Memphis Amp ? | Hoppy72450 | Car Audio | 9 | 23rd April 2011 04:07 PM |
| Orion HCCA 250 power supply issues. | ECM | Car Audio | 22 | 24th March 2008 07:02 PM |
| power supply issues | beamnet | Tubes / Valves | 6 | 9th September 2005 11:47 AM |
| more help, power supply issues | theChris | Solid State | 15 | 11th April 2003 06:54 PM |
| help on power supply issues and more! | mwmitchell | Tubes / Valves | 2 | 16th August 2002 01:35 AM |
| New To Site? | Need Help? |