Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Question about automotive relays??
Question about automotive relays??
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 20th April 2006, 09:37 PM   #1
jaygeorge1979 is offline jaygeorge1979  United States
diyAudio Member
 
Join Date: Dec 2005
Location: tejas
Default Question about automotive relays??

hey guys

i am working on a project where the ultimate goal is to have a few horns go off if the car door opens...the goal isnt all that important...what is important is knowing what to look for in an automotive relay...so help me out

i plan on splicing into the wire that runs to the little light that turns on when the vehicle door is adjar....this wire will be the signal turn on wire for a relay (i am thinking maybe 30 amps?) which will have power incoming from the battery (either directly or thru the fusebox) and sending it out to a couple of vehicle horns...

what power rating shoud i look for in the relay? is there any problems with my general explanation? what about fuses? cuz i am aware when it comes to an automotive audio amplifier, the main battery positive cable needs a fuse; so will i need to fuse the incoming battery power wire running to the relay? what size fuse to use? the link i have posted is where i was browsing different relays and i cant figure out how some of them differ, or why some 4 pin relays are better than other 4 pin relays just cuz the internal construction is a little different...someone please shed some light on this for me ...thanks!

http://www.mouser.com/catalog/625/1299.pdf
  Reply With Quote
Old 20th April 2006, 09:56 PM   #2
richie00boy is offline richie00boy  United Kingdom
Did it Himself
diyAudio Member
 
richie00boy's Avatar
 
Join Date: Nov 2003
Location: Gloucestershire, England, UK
Question about automotive relays??
The relay doesn't need to be all that big for a few horns. A standard 30A will be more than enough. Fuse the incoming positive wire with a 10A fuse, but this value may need changing depending on your horns. The horn current should be in the technical specs for them.
__________________
www.readresearch.co.uk my website for UK diy audio people - designs, PCBs, modules and more.
  Reply With Quote
Old 20th April 2006, 10:43 PM   #3
jaygeorge1979 is offline jaygeorge1979  United States
diyAudio Member
 
Join Date: Dec 2005
Location: tejas
thanks for the reply richie...lets just say each horn is rated at 5 amps...so i would buy a 10 amp fuse and put it in line with the main power wire? this would protect me from any fire damange? or should i get a slightly higher rated fuse? what is the possible risks of using no fuse in this application?
  Reply With Quote
Old 21st April 2006, 12:13 AM   #4
Eva is offline Eva  Spain
diyAudio Member
 
Eva's Avatar
 
Join Date: Oct 2003
Location: Near the sea
Send a message via MSN to Eva
Use the smallest fuse that does not blow during normal operation, that will provide the best protection, altough it may require some experimentation (or just measuring the actual current being draw by your load and selecting a slightly higher fuse).

Remember to place the fuse in the positive lead at the beginning of your power line in order to protect the entire line.
  Reply With Quote
Old 21st April 2006, 03:23 AM   #5
jaygeorge1979 is offline jaygeorge1979  United States
diyAudio Member
 
Join Date: Dec 2005
Location: tejas
thanks for the reply eva...ill be sure to do that
  Reply With Quote

Reply


Question about automotive relays??Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Reed Relays Vs Standard Relays steevo Solid State 9 21st September 2009 06:08 AM
Preamp source selection using relays question. sjalloq Solid State 5 31st July 2009 03:01 PM
Automotive relays and internal resistance? pjpoes Everything Else 2 9th February 2007 05:18 PM
quick question about tube relays Scott_fx Tubes / Valves 10 19th October 2006 08:32 PM
Question about 555 timer circuit with relays Ralph Parts 27 9th October 2004 12:53 PM


New To Site? Need Help?

All times are GMT. The time now is 04:27 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki