diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Car Audio (http://www.diyaudio.com/forums/car-audio/)
-   -   My setup. Whats wrong? (http://www.diyaudio.com/forums/car-audio/72044-my-setup-whats-wrong.html)

npcout 18th January 2006 06:25 PM

My setup. Whats wrong?
 
Alright guys, i have an Alpine head unit with 2 pre amp outputs. I have a 4 channel amp already in my car, hooked up, working and everything for my 4 speakers. So the 4 channel amp is all done with.

I have a 2 channel amp to power my subs, and distribution block, and a cap. How would u guys set the new stuff that i have up, and keep my old stuff there to? Just how would i add it in for the easiest cheapest install? (power wire to distribution block then split to the cap an amp? or what?)

Plus, for my 4 channel amp, i have a 60amp fuse up by the battery, and my 2 channel amp ill do the same. My 2 channel amp has 4X 25 amp fuses on it. Ill have the 60 amp fuse up by the battery, what size should i put in the distribution block?

Thanks a lot guys in advance.

Minds 21st January 2006 12:01 PM

hmm i think there's no other way than "power wire to distribution block then split to the cap an amp" because that's the easiest way:) for the RCA conn, does your 4 channel have an RCA out?

use 60 for the 2 channel.


All times are GMT. The time now is 10:50 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2