Amp protection light on - diyAudio
Go Back   Home > Forums > General Interest > Car Audio

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 26th December 2005, 07:58 PM   #1
diyAudio Member
 
Join Date: Oct 2005
Default Amp protection light on

I have TWO Audiobahn amps. A8000T mono amp and an A6004T 4 channel and BOTH amps have the protect light on. I drove around last night for like 2 hrs without turnin it off n most of the time it wasnt even turned up but this mornin when i turned my truck on the protect lights r on. I havnt really messed with anything yet as i'm so sick of messin with my stereo **** its gettin outrageous. EVERYTHING is hooked up right im POSITIVE i've rewired everything 3 times before. I find it odd that they BOTH did it at the same time and they WONT come back on? One of my tweeters was crackin a lil last night, could that have caused it? And if so y didnt JUST the 4 channel go out?
  Reply With Quote
Old 26th December 2005, 08:03 PM   #2
anatech is offline anatech  Canada
diyAudio Moderator
 
anatech's Avatar
 
Join Date: Jun 2004
Location: Georgetown, On
Hi wally91chevrole,
Check your grounds and supply leads. You may have a bad connection. Also check the ground wire from the battery to the body.

-Chris
  Reply With Quote
Old 27th December 2005, 04:18 AM   #3
Stocker is offline Stocker  United States
diyAudio Member
 
Join Date: Dec 2003
Location: Austin
If your tweeter was crackling, it may have been clipping. Clipping is a good way to kill a tweeter and you have to turn it down or risk damage. Damage like a partial short in the voice coil, causing low impedance. Do the speakers measure what they should (probably 4-ish ohms) ?

Another good question, do the crossover components (if they are passive crossovers) have sufficient voltage (power) ratings for the amplifiers?
__________________
Jesus loves you.
  Reply With Quote
Old 27th December 2005, 01:08 PM   #4
diyAudio Member
 
Join Date: Nov 2003
Location: Louisiana
Do the amplifiers go into protection if you unplug the RCA inputs?

If so, you need to check the shield ground of the head unit's RCA outputs. There should be essentially no resistance between the RCA shield and the case of the head unit. If the shield is open (high resistance between shield and HU case), there could be a problem with one of the amplifiers.

I've seen many cases of the primary of the power supply transformer shorting to the secondary of the transformer. In many amplifiers this causes voltage to be passed to the shield ground. This will damage the head unit and sometimes other amplifiers. With the amplifiers on and no RCAs plugged into the inputs, there should be little or no voltage on the RCA input shield. If you read something near 12v, there is a problem with the amp. Sometimes, the problem is intermittant and may be difficult to find. This can also cause the noise that you mentioned.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Carver PM-1.5 Working but Protection Light On intechpc Solid State 0 5th September 2008 10:15 PM
protection light jonsey10 Class D 0 26th February 2007 07:13 PM
speaker protection (OR) overload protection myanmar Solid State 7 13th July 2006 08:21 AM
Carver PM 1200 Protection light on, amp works! screamersusa Solid State 1 17th August 2005 01:51 AM
Operation / Protection light on bellnoc78 Car Audio 2 17th May 2004 02:01 AM


New To Site? Need Help?

All times are GMT. The time now is 07:05 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2