Help needed with Alpine Changer installation

arcosmo · 16th September 2005, 07:53 AM

Hey guys! My cheap JVC HU is fried and I put my OE HU back in. My car is a 97 Mazda MX-5 Miata, here is a shot of the front of the AM/FM/Cass http://stephen.fosketts.net/miata/au...ta%20Front.jpg . Here is a shot of the back that shows the 12 pin AUX http://stephen.fosketts.net/miata/au...ata%20Rear.jpg . I have a left over Alpine CHM-S611 that I am wanting to install to tide me over while I decide on a proper HU/Amp/Speaker combination.

I missplaced the DIN cable that came with it. Do I need a new DIN cable and anything other than this http://www.thecarstereo.com/product/...duct=MZCI01612 to install the changer?

Thanks,
Mike

arcosmo · 16th September 2005, 08:53 PM

Anyone?

squalor · 17th September 2005, 02:15 AM

I'm not quite sure but it is my opinion that Alpine changers that are Ai-Net enabled are only controlled by Alpine head units. If you could find a 9813 on ebay it could control that changer and a complete 3way active speaker system.

16th September 2005, 07:53 AM	#1
arcosmo diyAudio Member Join Date: Sep 2005	Help needed with Alpine Changer installation Hey guys! My cheap JVC HU is fried and I put my OE HU back in. My car is a 97 Mazda MX-5 Miata, here is a shot of the front of the AM/FM/Cass http://stephen.fosketts.net/miata/au...ta%20Front.jpg . Here is a shot of the back that shows the 12 pin AUX http://stephen.fosketts.net/miata/au...ata%20Rear.jpg . I have a left over Alpine CHM-S611 that I am wanting to install to tide me over while I decide on a proper HU/Amp/Speaker combination. I missplaced the DIN cable that came with it. Do I need a new DIN cable and anything other than this http://www.thecarstereo.com/product/...duct=MZCI01612 to install the changer? Thanks, Mike

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Alpine Cd Changer Pinout	N-Channel	Car Audio	26	5th March 2010 05:26 AM
Alpine CDA-9805 CD player info needed please.	skooter	Car Audio	0	18th October 2007 04:22 AM
has anyone repaired a Alpine CD changer?	twofake	Car Audio	3	22nd August 2007 11:27 AM
WTB Alpine 5957 or 5959 changer	Puggie	Swap Meet	5	10th July 2006 02:56 PM
Replacing IRFZ42 in Alpine 3558 advice needed....(pics)	maxw	Car Audio	20	8th July 2005 08:16 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

16th September 2005, 08:53 PM	#2
arcosmo diyAudio Member Join Date: Sep 2005	Anyone?

17th September 2005, 02:15 AM	#3
squalor diyAudio Member Join Date: May 2005 Location: Redneck Riviera	I'm not quite sure but it is my opinion that Alpine changers that are Ai-Net enabled are only controlled by Alpine head units. If you could find a 9813 on ebay it could control that changer and a complete 3way active speaker system.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)