Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|12th September 2004, 04:50 PM||#1|
Join Date: Aug 2004
Please help me evaluate: Proac 2.5 clone in CAR with PCX-480
Hello all CAR audio lovers,
I'm in the SQ side (not SPL). In the past, I used Dynaudio's System 220mkII with PPI's PCX-480. The overall sound was too dark as well as too warm. I then decided to innovate my CAR audio system by bringing in the well-known DIY speaker system---it's ProAC 2.5 clone. This 2.5 clone will be implemented as the front stage system in my car.
The 2.5 clone contains :-
-SCAN-SPEAK 8513 tweeter.
-SCAN-SPEAK 8535 woofer.
These drivers will be driven by PCX-480. ( 4x80 watts) Each channel will drive each driver with separate crossover. There will be no electronic or active crossover involved, just passive crossover.
Unfortunately, eech driver has 8-ohm impedance. This will cause a great deal of workload for PPI PCX-480. Moreover, I'm not sure whether PCX-480 can handle these SCAN-SPEAK drivers.
Could you guys help me evaluate this project? Will this project fail or succeed? (or...am I crazy?)
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Proac Clone||SergeDufour||Multi-Way||0||22nd November 2006 10:08 PM|
|Bass of Proac 2.5 clone||Ivan2006||Multi-Way||1||23rd October 2006 10:21 AM|
|Proac Clone Q's||elilindner||Multi-Way||0||3rd December 2003 03:19 AM|
|Question regarding ProAc 2.5 Clone and Tempo 2 Clone||zoooh||Multi-Way||5||11th March 2003 09:19 PM|
|Proac 3.5 clone||Buhl||Multi-Way||1||4th January 2003 11:05 PM|
|New To Site?||Need Help?|