diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Car Audio (http://www.diyaudio.com/forums/car-audio/)
-   -   can i use this wiring diagram (http://www.diyaudio.com/forums/car-audio/39739-can-i-use-wiring-diagram.html)

mitchell 21st August 2004 01:24 AM

can i use this wiring diagram
 
2 Attachment(s)
i know this diagram is crap but any way, if you cant see it properley i want to connect 2 amps to one sub,

cd player into 1st amp through the RCA in

using the RCA out from the 1st amp, connect to the second amp
through the RCA in.

then bridge the sub to the second amp


can i do this

richie00boy 21st August 2004 03:16 PM

Should be ok.

bigmike216 22nd August 2004 02:27 AM

You can do that, and it'll work.. there's just no point. You're not going to get any extra power by running the rca out from one amp to the rca in of another amp. You're just passing the line level signal through the first amp onto the second. If you want to run two amps on one sub, you need a DVC subwoofer.. And you need to match the gains on the amps.

DilutedImage 23rd August 2004 08:50 PM

I'm with BigMike on this one ... Based on your diagram, there is no point in having that first amp in the loop, as it is powering nothing. If you intend to run OTHER speakers off that first amp, then that would be the way to do it ... 2


All times are GMT. The time now is 12:55 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2