Hello, any help will be much appreciated.
I purchased this amp about a year ago and it has been running great until it stopped turning on. I metered the both the remote turn on wire and 4gauge power disconnected from the amp. Both wires test 12 volts like they should. As soon as I connect the amp to the wires, The voltage on +12 shows ~ 6v and never powers on. I took the amp apart and the power and speaker wires are connected and solid. I checked the resistance on each transistor on the board. All came back with a reading. Some were 0, some where 2 and some were 5. This is without any power connected. I just took some pictures and will post them up when i get the camera connected in the next hour.
I don't have much experience with electronics but was hoping for some guidance in the right direction.
Thanks in advance.
I purchased this amp about a year ago and it has been running great until it stopped turning on. I metered the both the remote turn on wire and 4gauge power disconnected from the amp. Both wires test 12 volts like they should. As soon as I connect the amp to the wires, The voltage on +12 shows ~ 6v and never powers on. I took the amp apart and the power and speaker wires are connected and solid. I checked the resistance on each transistor on the board. All came back with a reading. Some were 0, some where 2 and some were 5. This is without any power connected. I just took some pictures and will post them up when i get the camera connected in the next hour.
I don't have much experience with electronics but was hoping for some guidance in the right direction.
Thanks in advance.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.