diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Car Audio (http://www.diyaudio.com/forums/car-audio/)
-   -   DIY Components - want to use XT25 (http://www.diyaudio.com/forums/car-audio/36656-diy-components-want-use-xt25.html)

Ten 99 25th June 2004 01:55 AM

DIY Components - want to use XT25
 
I'm new here, and new to this game, but I'm willing to learn. I tried doing some searches, but I was not succesful in finding what I wanted.

I was looking for setups that other had that might have used the Vifa XT25 tweeter paired with a 7" or 8" midwoofer (IB) setup. I was hoping that someone could recommend a good mid to pair with the XT25 in the 7" to 8" size, and a good Xover sketch for it. The car it would go into is a C5 Corvette, and the stock speaker locations where the BLOZE speakers were located, can actually handle up to an 8" midwoofer with ease, as well as a larger sized tweeter like the XT25 with absolutely no problem at all. In fact, the stock speakers use an 8" and 4" combo on a baffle from the factory. Problem is they are junk.

If anyone has any ideas, I'd love to hear them!

Thanks!

Chris
:D

Ten 99 26th June 2004 11:45 PM

Shameless bump...
:o


All times are GMT. The time now is 10:06 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2