Hello !
Have a Gen 1 225 HCCA with very weak output.
a 40hz test tone distorts very easy and only pulls approx 2amps @13.8v. 8ohm stereo.
It looks to be recapped everywhere (fresh solder)
Any ideas? Anyone repair these here?
Amp is very clean for it's age so I'd say it's worth salvaging.
Thanks!
Have a Gen 1 225 HCCA with very weak output.
a 40hz test tone distorts very easy and only pulls approx 2amps @13.8v. 8ohm stereo.
It looks to be recapped everywhere (fresh solder)
Any ideas? Anyone repair these here?
Amp is very clean for it's age so I'd say it's worth salvaging.
Thanks!
http://www.bcae1.com/temp/orionampclamps.swf
If you have to remove the clamps, refer to the diagram above.
Do you have a scope?
What is the DC voltage on the emitter resistors?
If you have to remove the clamps, refer to the diagram above.
Do you have a scope?
What is the DC voltage on the emitter resistors?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- General Interest
- Car Audio
- Orion 225-HCCA Repair ?