Okay just to be clear.... At the moment I have one leg lifted on the lift the 270 ohm resistor, all 3 muting transistors out, the trace cut in multiple spots with no jumper wire in place.
Do you still want me to lift the end of the 100k that's not connected to the diode and check voltage? And if so, check it where?
Do you still want me to lift the end of the 100k that's not connected to the diode and check voltage? And if so, check it where?
Just wondering if you eventually figured out what the issue was with this amp?
....I would love to know also, this is very interesting.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.