This amp is using MTP60N06HD as the power supply fets with 100 ohm gate resistors.
Wondering what is the best replacement for the power supply fets ? and do i change the gate resistor value according to what fets i use ?
Also for the regulators in this amp are they using the LM317/337 or are they using 2N6491/2N6488 as the regulators wondering since they are missing from the board
Also would updating the chipset from 494 to a 594 be beneficial or not really
Wondering what is the best replacement for the power supply fets ? and do i change the gate resistor value according to what fets i use ?
Also for the regulators in this amp are they using the LM317/337 or are they using 2N6491/2N6488 as the regulators wondering since they are missing from the board
Also would updating the chipset from 494 to a 594 be beneficial or not really
Last edited:
Also 2 other questions.
Would switching the chipset from 494 to 594 be beneficial or not really?
And would these be good replacements for the switches?
F2UEEAU C&K | Switches | DigiKey
Would switching the chipset from 494 to 594 be beneficial or not really?
And would these be good replacements for the switches?
F2UEEAU C&K | Switches | DigiKey
This amp is missing 1 of the FEP30DP rectifiers.
Would the SF304C be a good replacement?
FEP30DP-E3/45 Vishay Semiconductors | Mouser
https://www.mouser.com/ds/2/345/sf301c-sf307c-8990.pdf
Would the SF304C be a good replacement?
FEP30DP-E3/45 Vishay Semiconductors | Mouser
https://www.mouser.com/ds/2/345/sf301c-sf307c-8990.pdf
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- General Interest
- Car Audio
- Orion XTR 2250 The Beast