With just power and ground connected here's what i get on the SG3525A
Could the 3525 be defective or any ideas what might cause this ?
Pin 1:2.60
Pin 2:2.59
Pin 3:0.01
Pin 4:0.15
Pin 5:2.07
Pin 6:3.77
Pin 7:2.06
Pin 8:4.92
Pin 9:1..24
Pin 10:0.00
Pin 11:0.98
Pin 12:0.00
Pin 13:12.50
Pin 14:1.00
Pin 15:12.50
Pin 16:5.19
on the gate legs of the power supply fets i get 1.20 volts
This is with no remote applied just power and ground
Any ideas?
Could the 3525 be defective or any ideas what might cause this ?
Pin 1:2.60
Pin 2:2.59
Pin 3:0.01
Pin 4:0.15
Pin 5:2.07
Pin 6:3.77
Pin 7:2.06
Pin 8:4.92
Pin 9:1..24
Pin 10:0.00
Pin 11:0.98
Pin 12:0.00
Pin 13:12.50
Pin 14:1.00
Pin 15:12.50
Pin 16:5.19
on the gate legs of the power supply fets i get 1.20 volts
This is with no remote applied just power and ground
Any ideas?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.