Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Power Supply Driver Question
Power Supply Driver Question
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 14th November 2017, 10:22 PM   #1
Jason Smith 616 is offline Jason Smith 616  United States
diyAudio Member
 
Join Date: Oct 2016
Default Power Supply Driver Question

Working on a power supply board all of the drivers and fets were burnt..

I removed all of them and cleaned the board..

Is there anything else that would cause a direct short from B+ to B- terminals on the board? measured from B+ to B- i get 0.03 ohms So wondering if there is anything else that would cause this besides a shorted transformer
  Reply With Quote
Old 15th November 2017, 12:38 AM   #2
seankane is offline seankane  United States
diyAudio Member
 
seankane's Avatar
 
Join Date: May 2010
Location: Washington State
Could you post a photo of the board? What model of amplifier are you working on?
__________________
Pyramid 52 Amp Power Supply----Fluke 787 Processmeter----Tektronix 465 Scope----Velleman HPS40 Scope----Soldering Iron----Desoldering Iron----Hejet HJ 500-S Heatgun----DM4070 Digital LCR Meter----Propane Torch
  Reply With Quote
Old 15th November 2017, 05:03 AM   #3
Perry Babin is offline Perry Babin  United States
diyAudio Member
 
Join Date: Nov 2003
Location: Louisiana
A solder bridge between the drain and source for one of the FETs could cause that.
  Reply With Quote

Reply


Power Supply Driver QuestionHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Power Supply Driver Question Jason Smith 616 Car Audio 1 14th November 2017 07:31 AM
THAT DRIVER preamp power supply EC1950 Analog Line Level 11 7th October 2015 08:15 PM
power supply driver jumper luigidedom Car Audio 3 29th January 2015 01:55 PM
Power supply Driver Question S Merlington Car Audio 1 21st July 2013 10:34 PM
Driver Tube Power Supply Question ? HP8903B Tubes / Valves 9 16th February 2013 11:35 AM


New To Site? Need Help?

All times are GMT. The time now is 11:32 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki