Box Construction .. advise needed - diyAudio
Go Back   Home > Forums > General Interest > Car Audio

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 2nd April 2004, 12:01 AM   #1
diyAudio Member
 
Join Date: Apr 2004
Location: IL
Question Box Construction .. advise needed

Well I just bought one 10" Alpine Type-R subwoofer for my '03 Mustang.

I'm going to be using a Kenwood 600 watt amp for now until I save up some more money for another 10" Alpine and another amp.

I really want to build my own box but I'm not sure which one will sound better, sealed or ported. All I've ever heard before is ported. I will mostly be listening to rap and some rock music.

Also, where is the best location for the ports on a box? Top? Side?

One more question too, what's the best type of wood to build a box from? I have a bunch of 1/2" plywood but I'm not sure if that's thick enough. Most of the boxes I've owned look to have been about 3/4" thick plywood.

Thanks,

Fast Kat

  Reply With Quote
Old 2nd April 2004, 09:56 PM   #2
jp88 is offline jp88  United States
diyAudio Member
 
Join Date: Mar 2004
Location: NC
sealed or ported that is a personal preference. Sealed boxes usualy have a little better sq and better power handling ported boxes usally are a little mor eficient and just a tad louder.
if you go with a ported box aim the spkrs up and the ports at the rear of the car. you need to build box out of 3/4 inch medium density fiberboard (mdf) not plywood plywood will rattle..
__________________
WHAT
____________
  Reply With Quote
Old 2nd April 2004, 10:56 PM   #3
diyAudio Member
 
baggystevo82's Avatar
 
Join Date: Dec 2003
Location: Herefordshire
Send a message via MSN to baggystevo82
personally id go ported for a car sub. The acaustics in a car are too bad to notice any extra definition and control offered by sealed designs imo. You may as well go for the highes spl and efficiency. ported designs also go down a bit lower, i think this is your driver...
Attached Images
File Type: jpg untitled-1 copy.jpg (88.3 KB, 266 views)
  Reply With Quote
Old 3rd April 2004, 12:04 AM   #4
diyAudio Member
 
Bill Fitzpatrick's Avatar
 
Join Date: Jun 2001
Location: Eugene, OR
Build a really thick walled box with the speaker inside. Make sure it completely stuffed with damping material and that there are no openings. That's just right for rap.
  Reply With Quote
Old 3rd April 2004, 01:16 AM   #5
diyAudio Member
 
Join Date: Apr 2004
Location: IL
Thanks everyone ...

However I said screw it and just went and bought a box. I went to Circuit City and they helped me out a lot. The salesman played the 10" Alpine in the sealed box and the ported one. He sold me on the sealed one. It sounded a little better to me. I figured by the time I make the box .. the time and money I put into it wouldn't be worth it to me. The box was fairly cheap, about $50.

Again, thanks for the advise everyone. Now I gotta go spend the next several hours installing everything. It's never fun running the power and rca wires.
  Reply With Quote
Old 5th April 2004, 02:33 PM   #6
pkmaven is offline pkmaven  United States
diyAudio Member
 
Join Date: Apr 2004
Location: Massachusetts
Default building the sub enclosure

Contact the vendor of the subwoofer and ask for enclosure plans. Only use MDF, never, never use plywood or you will learn what the term "resonance" means! The least expensive, and least hastle for the car stereo dealer is a sealed box. If you care about the sound quality of the bass, you might investigate a bandpass enclosure. It doesn't require a crossover and it is ported. The square prt could exit from the top of the box, patially external, and pass through a neatly cut opening in the parcel shelf above, where it would deliver bass into the INSIDE of the car not the trunk! P.
  Reply With Quote
Old 13th April 2004, 05:14 AM   #7
tico70 is offline tico70  Costa Rica
diyAudio Member
 
Join Date: Mar 2004
Location: MEXICO
Default Here is a book

I have a ebook where you can find lots of information about Box construction...the book name is CAR SPEAKER PROJECTS ILLUSTRATED by DAN FERGUSON.. the ebook is a large file 21.4M in 5 compressed rar files let me know where can I upload it...(if you have an email with enough space I can email you the files)..
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Changing bridge. Advise needed Fidelity Audio Power Supplies 10 7th December 2010 11:11 AM
Help! Speaker design advise needed beeroclock Full Range 0 30th March 2007 11:58 AM
Wildlife Electronic Caller, advise needed jringels Class D 5 13th April 2006 10:14 PM
PCB or kit for power amplifier advise NEEDED rmihai Solid State 7 29th September 2005 12:38 AM
Simple Cap-Coupled CF Advise Needed dr._sleep Tubes / Valves 6 10th August 2005 06:50 PM


New To Site? Need Help?

All times are GMT. The time now is 10:35 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2