Help with Xtant 604X Help with Xtant 604X - diyAudio
Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Help with Xtant 604X
Help with Xtant 604X
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 14th July 2017, 01:51 AM   #1
kiermee is offline kiermee
diyAudio Member
 
Join Date: Jan 2010
Default Help with Xtant 604X

Good day,

I have a Xtant 604x that I am currently repairing. The power supply mosfets Q31,32,33 and 34 were blown and burnt. The other remaining 4 mosfets were good when tested. I changed the 4 damaged mosfets and the 22 ohm gate resistors. When I attach the powersupply 12v and ground connection (no remote) the amps draws excessive current. When I recheck the mosfets they are all good. If I remove the 4 mosfets that I replaced and leave in the 4 that were originally good (there are 8 in total) by themselves and reapply power there is no heavy current draw and when the remote is applied the amp powers up normal. Any ideas on this please?

Are the TC4427 mosfet drivers damaged when they blow? I noticed that there are two circuits here, every 4 mosfets has a driver assigned to it?

Thanks in advance for any assistance.
  Reply With Quote
Old 14th July 2017, 02:44 AM   #2
Perry Babin is offline Perry Babin  United States
diyAudio Member
 
Join Date: Nov 2003
Location: Louisiana
It's possible that the driver IC failed. With the 4 FETs out so that the amp will power on without excessive current draw, compare the input and output signals of both drivers. Are the signals from one driver identical to the other?
  Reply With Quote
Old 14th July 2017, 03:13 AM   #3
kiermee is offline kiermee
diyAudio Member
 
Join Date: Jan 2010
Thanks for your quick response Perry. I will do the comparison tomorrow and get back to you.

Thanks again
  Reply With Quote
Old 17th July 2017, 10:20 PM   #4
kiermee is offline kiermee
diyAudio Member
 
Join Date: Jan 2010
Hey Perry

I compared the good side to the bad side

Good side the driver ic reads as follows

In 1 = 0.8v
In 2 is the same
Out 1 = 12.6v
Out 2 = 12.6v

The bad side

In 1 = 2.36v
In 2 = 2.36v

Out 1 = 2v
Out 2 = same

Thanks
  Reply With Quote
Old 18th July 2017, 04:42 AM   #5
Perry Babin is offline Perry Babin  United States
diyAudio Member
 
Join Date: Nov 2003
Location: Louisiana
The bad side actually looks more like what I'd expect to be good.
  Reply With Quote
Old 18th July 2017, 10:57 AM   #6
kiermee is offline kiermee
diyAudio Member
 
Join Date: Jan 2010
Ok thanks will retrace circuit
  Reply With Quote

Reply


Help with Xtant 604XHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Xtant 604x jlind54 Car Audio 27 1st March 2015 03:38 PM
Soundstream Reference 604x crossover mod Dr Zeus Car Audio 7 5th February 2012 11:27 PM
XTant X603 Dr Zeus Car Audio 4 23rd May 2011 08:12 AM
Xtant 1001d joesch1999 Car Audio 29 28th April 2011 01:30 AM
Xtant 604X / 2 ohm sub jimeez Car Audio 1 10th January 2004 05:35 AM


New To Site? Need Help?

All times are GMT. The time now is 04:52 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki