Rockford t1000-1bd loud whine when powered up

[rhempz01]

So I now have a t1000-1bd amplifier, that has a loud whine when powered up. I wondering if anyone else had dealt with this problem in this amplifier before.

 

[rhempz01]

Upon visual inspection of the board I noticed some sober beads and discoloration around q2001.

 

[rhempz01]

It looks like an output failed. So drivers and an output

 

[rhempz01]

Output

 

[rhempz01]

Here is a photo of q2001 I'm not sure if this is the problem. on 2-3 on the 3415's I have as follows:
Q2009. 11.08m
Q2007. 11.27m
Q2008. 5.68m rising
Q2006. .1ohms
Q2015. 10.01m slowly rising
Q2013. 10.33m same rising
Q2014. 10.55m same
Q2015. 11.65m
Other two legs are open on all.

 

[Perry Babin]

Were these measured out of the circuit?

 

[rhempz01]

no perry just in circuit. i really havent started with this one yet. should i just remove the gate legs?

 

[rhempz01]

i havent even hooked it up, only have been told it has a buzzing sound when powered up and no protection.

 

[Perry Babin]

Re-check Q2006 and the other output under the same clamp.

 

[rhempz01]

So it is more of a static noise, and it's worse when rca's are plugged in. Also,
Q2006: 10.79m
Q2008: 10.79m
Q2007: 9.38m
Q2009: 9.41m