Audison vrx 1.500.2 clamps

[rrae]

I got this amp. What is the proper way to remove these clamps? Also i have service manual, there is mention, that old clamps cant be used, only way is to put back with new ones.

 

[motronix]

Hi
i am the Service Lab in Israel of Audison & Hertz. i use flat screwdriver to move out this spring clamps with no problem, and Because I release them has been skillfully I can bring them back. Of course if I need new clamps I order it from the manufacturer.

 

[AndyVicus]

Some one can link the service manual?

 

[motronix]

In What section/module do you need help?
the full Service manual is large file with other models i can't share it (Sorry)

 

[AndyVicus]

With 2 amps limit the voltage stay at 7-8V. The rail growing the I listen a click and it fall. I need the psu section and the power amp section. The analog audio stuff I think don't care.

 

[motronix]

VRX

I hope it help you

 

[AndyVicus]

I do more try. Without the DHF module the power supply start up correctly and no dc on the output. With the module there is dc on output and the psu cycle on off. Can you give me the schematic of dhf module?

 

[miku82]

do you have lmd schema for the vrx 1.500 mk1

 

[Xpl4yn]

Any chance you have the sm24 subsonic filter module and can show how its builtup? I havent got one in my amp, and i kinda need it so i'm thinking about builsing my own since it is so rare to find one!

 

[motronix]

Try this help

SM-24

 

[Xpl4yn]

SM-24

You don't happen to know where i can get all the parts on the list? Hate that i bought this stupid nonsettings amp..

 

[Perry Babin]

Most modern head units have built in crossovers and equalization. Do you really need to build the module?

 

[Xpl4yn]

Most modern head units have built in crossovers and equalization. Do you really need to build the module?

Yes, cause i have a **** headunit x) also i can't find any external subsonic filter anywhere, so ita probably easier to make my own since it is made to be there x)

 

[RonBenRas]

Hello
im new here.

does anybody have the diagrams for the VRX4.300?

i am having problems, with one right channel.

if i measure the left channel, between (ground to ground) there is 0 ohm's (shortcircuit).

but right channel there is unlimited ohm's, so i think its the common ground connection, thats acting up..

But the service diagrams would be VERY helpful.

TNX in advance.
Ronnie