can i fix my broken sub

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I was at a comp and one of my subs stuck in the up position. the glue on the spider failed and the coil came out of the magnetic gap... any thoughts on if the sub is fixable... i ordered some CA glue but not sure if there will be problems with the coil..pole piece ...or top plate

the coil isnt discolored..appears to b fine

any info would b helpful
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.