Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Need help with install. Help with clarification
Need help with install. Help with clarification
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 24th August 2013, 06:06 AM   #1
Buckeyechad is offline Buckeyechad
diyAudio Member
Join Date: Aug 2013
Default Need help with install. Help with clarification

Hello and thx!!
I have a 2012 yukon and installing new door speakers and subs with a 4 channel amp to run door speakers and 2 channel amp for subs.
My plan is to use a jl cleansweep in addition to the above.
From what I understand... In order to also keep use of tweeters in a pillars and d pillars I also need passive crossovers for those.
So I would wire into passive crossovers from the factory sub... Then wire tweeters directly from tweeter outputs on passive crossover,,, and woofer outputs from passive crossover into the cleansweep. I would do this for both fronts and both rears.
Do I do an inline crossover after the amp I am adding for the door speakers???

Next question is about amp for subs.
I want to keep the factory sub under Ctr console as well.... So can I just splice into wiring after leaves factory amp before enters factory sub????

Any and all help much appreciated!!
  Reply With Quote


Need help with install. Help with clarificationHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Loop stability clarification . . . pete_schumacher Solid State 45 21st February 2013 04:04 PM
NFB Clarification cbj591 Tubes / Valves 9 17th July 2010 02:17 PM
An attempt for clarification. Lumba Ogir Solid State 1 4th March 2009 07:46 PM
Newbie needs clarification MlinarS Tubes / Valves 5 9th February 2005 03:02 PM

New To Site? Need Help?

All times are GMT. The time now is 06:43 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio