Ok I replaced the outputs with the orginal part number..
When i power the amp up it will idle fine..
If i plug the RCA jacks in the amp will start drawing excessive current..
If i plug the RCA's in and then power it up it draws excessive current as well...
Any ideas what to look at?
When i power the amp up it will idle fine..
If i plug the RCA jacks in the amp will start drawing excessive current..
If i plug the RCA's in and then power it up it draws excessive current as well...
Any ideas what to look at?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.