I need T/S parameters for Pioneer TS-W305DVC subwoofer
Pioneer doesn't publish the specs on their website & their customer support also had no clue when I talked to them. :rolleyes:
If any of you have by chance purchased these speakers, the T/S parameters (Qt, Qes, Qms, Vas, fs, Xmax,..etc.) are included
in the owners pamphlet that comes inside the retail box. Would greatly appreciate if you could pass me the nfo.
This 12" car audio sub looks like it might work well for my project
but can't tell for sure without the T/S parameters to see what kind of responce I can expect out of it in a vented box with the size limitation I have in mind.
TS-W305DVC / TS-W125DVC
Dia. 12 in.
Z 8.0 / 2.0 ohm
Re 6.0 / 1.5 ohm
fs 33.9 Hz
Vas 1.794 ft3
Sd 0.0460 m2
BL 21.247 / 10.667 Tm
Cms 1.695x10-4 m/N
Mms 129.73 g
Rms 1.953 Ns/m
Mg. Wt 2,350 g
VC dia. 2.25 in.
Hvc 1.13 in.
Hag 0.39 in.
Xmax 0.37 in.
Levc 3.337 / 0.834 mH
Displ. 0.083 ft3
SPL 89 dB/W
Power (nom) 400 Watts
Power (max) 800 Watts
Sealed - 1.5 ft^3
Ported - 1.65 ft^3 (3" diameter, 5" long)
4th Order Bandpass - 0.9 ft^3 sealed, 0.9 ft^3 ported (3" diameter, 4" long)
Don't ask for more, I don't own the speaker. ;)
That is everything.
Thank you very much from a fellow nose picker. :clown:
I am definitely hangin' with the right crowd here. :cool:
|All times are GMT. The time now is 12:13 PM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright ©1999-2015 diyAudio