Go Back   Home > Forums > General Interest > Car Audio

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 15th April 2013, 03:06 AM   #1
diyAudio Member
 
Join Date: Dec 2012
Default rockford fosgate T1500-bd

rockford T1500-Bd

Just got one of these and and reading 79 volts on the speaker terminals. Unit powers up fine wiht power light no protect light. Checked the output fets and they are okay. Drive circuits seem to be fine also. I will post votlages tomorrow of the 5110 ic's. Does any body have schematic.

Does anybody have cross for a lm6361n for a rockford bd1000?
  Reply With Quote
Old 15th April 2013, 03:13 AM   #2
diyAudio Member
 
seankane's Avatar
 
Join Date: May 2010
Location: Washington State
Does anybody have cross for a lm6361n for a rockford bd1000?

Why not just get the original? Last time I got them, I got a bunch and they were cheap.
__________________
Pyramid 52 Amp Power Supply----Fluke 787 Processmeter----Tektronix 465 Scope----Velleman HPS40 Scope----Soldering Iron----Desoldering Iron----Hejet HJ 500-S Heatgun----DM4070 Digital LCR Meter----Propane Torch
  Reply With Quote
Old 15th April 2013, 10:03 AM   #3
diyAudio Member
 
Join Date: Dec 2012
Where did you get them.....there are obsolete.
  Reply With Quote
Old 15th April 2013, 11:44 PM   #4
diyAudio Member
 
Join Date: Dec 2012
Anybody got a schemstic for the t1500-bd
  Reply With Quote
Old 16th April 2013, 03:44 AM   #5
diyAudio Member
 
seankane's Avatar
 
Join Date: May 2010
Location: Washington State
Try "quest components" that's where I bought mine. They were not cheap but working on these amps a lot I figured I would buy a bunch, even though they rarely fail I am probably good.

I can send you one if you would like. PM with your address or you can give me your number.
__________________
Pyramid 52 Amp Power Supply----Fluke 787 Processmeter----Tektronix 465 Scope----Velleman HPS40 Scope----Soldering Iron----Desoldering Iron----Hejet HJ 500-S Heatgun----DM4070 Digital LCR Meter----Propane Torch
  Reply With Quote
Old 17th April 2013, 10:54 AM   #6
diyAudio Member
 
Join Date: Dec 2012
Sean,

thanks for the info. You don't have to send me one, i will save that lifeline for something in the future though. I looked that company up and will placing an order tomorrow. If you need to order RCA jacks for amps specifically the type with one set of inputs and one set for pass thru. I found them at MCM Electronics, i lucked out and was able to get them for around a $1.25 on sale. Its so much faster than removing the old one to repair the shield ground and they are identical to rockfords. Expect the white and red indicator are in the wrong place, which is an easy fix. Just cut the plastic tab on the back and slide the fronts off, switch the colors, and melt plastic tab on the back again. Just thought i would share, that way you don't have to get them from ebay.

matt,
  Reply With Quote
Old 17th April 2013, 05:16 PM   #7
diyAudio Member
 
seankane's Avatar
 
Join Date: May 2010
Location: Washington State
Thanks for the info. I have 100's of sets for each style of Rockford amp. I bought them years ago and all the colors are in the right spot. I have the singles for the HD amps, the doubles both configurations and the triples.
__________________
Pyramid 52 Amp Power Supply----Fluke 787 Processmeter----Tektronix 465 Scope----Velleman HPS40 Scope----Soldering Iron----Desoldering Iron----Hejet HJ 500-S Heatgun----DM4070 Digital LCR Meter----Propane Torch
  Reply With Quote
Old 17th April 2013, 11:26 PM   #8
diyAudio Member
 
Join Date: Dec 2012
Really, that is crazy!!! I bet you have a vast array of spare parts.

Ok so here are the readings for the 5110 IC's

U2000 U2010 speaker terminals = 79v
pins
1= 0.646v 0.631v
2= 3.208v 0.413v
3= 0.024v 0.026v
4= 3.236v 0.411v
5= 4.97v 0.023v
6= 10.60v 10.66v
7= 4.98v 0.024v
8= 9.69v 9.66v
  Reply With Quote
Old 17th April 2013, 11:37 PM   #9
diyAudio Member
 
seankane's Avatar
 
Join Date: May 2010
Location: Washington State
Does U2000 get hot?
__________________
Pyramid 52 Amp Power Supply----Fluke 787 Processmeter----Tektronix 465 Scope----Velleman HPS40 Scope----Soldering Iron----Desoldering Iron----Hejet HJ 500-S Heatgun----DM4070 Digital LCR Meter----Propane Torch
  Reply With Quote
Old 18th April 2013, 12:12 AM   #10
diyAudio Member
 
Join Date: Dec 2012
sorry that U2010 is actually IC U2002. It doesn't seem hot but i have haven't left it powered up long.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Rockford Fosgate T1500-1bd - no output, no protect, no smoke whitejohnny Car Audio 32 11th April 2013 09:24 PM
ROCKFORD FOSGATE T1500-1 BD josesony68 Car Audio 40 15th October 2012 11:53 AM
Rockford Fosgate T40001 BD Help scotts530 Car Audio 5 1st February 2012 06:01 AM
Rockford Fosgate BD 1000 mike49504 Car Audio 1 10th July 2011 10:54 PM
rockford fosgate 1500 bd mike49504 Car Audio 18 30th December 2008 07:37 AM


New To Site? Need Help?

All times are GMT. The time now is 10:51 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2