Is this amp worth trying to repair or is it a lost cause this is how i bought the amp guess i should have opend the bottom cover first..
Notice the inductor in front of the torriod its burnt and it needs all new power supply fets,outputs,regualtors,ect ect..
Notice the inductor in front of the torriod its burnt and it needs all new power supply fets,outputs,regualtors,ect ect..
Attachments
I have another 1 of theese amps with a bad inductor also..
I am going to replace the fets and outputs since they are shorted..
The amps is using SMP60N06's Wondering whats a good replacement for them??
Also Wondering does anyone know what core and guage wire i need to make new inductors for the power supply?? Or how do i go about ordering it as far as how do i determine what core and guage wire i need?
I am going to replace the fets and outputs since they are shorted..
The amps is using SMP60N06's Wondering whats a good replacement for them??
Also Wondering does anyone know what core and guage wire i need to make new inductors for the power supply?? Or how do i go about ordering it as far as how do i determine what core and guage wire i need?
The core on 1 of the amps is not re-usuable all the coating is burnt off...
Any ideas on how to figure out what core i need to buy??
Also the wire on theese is 3 or 4 strands twisted together and then wrapped around the core do i need to only measure 1 strand then twist 3 or 4 of them together when rewinding it?
Any ideas on how to figure out what core i need to buy??
Also the wire on theese is 3 or 4 strands twisted together and then wrapped around the core do i need to only measure 1 strand then twist 3 or 4 of them together when rewinding it?
replaced all power supply fets , gate resistors, drivers in the power supply..
All of the outputs are removed right now...
Perry stated i could use the inductor in the amp for testing right now..
Amp draws excessive current when i hook the remote wire up..
Anyone have any ideas?
All of the outputs are removed right now...
Perry stated i could use the inductor in the amp for testing right now..
Amp draws excessive current when i hook the remote wire up..
Anyone have any ideas?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- General Interest
- Car Audio
- Orion 2150sx