MTX 1000D Problem - Page 2 - diyAudio
Go Back   Home > Forums > General Interest > Car Audio

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 28th February 2013, 12:52 PM   #11
diyAudio Member
 
Join Date: Nov 2003
Location: Louisiana
Yes remove it.

There are only 8 pins. 1 is on one end. 8 is on the other end.
  Reply With Quote
Old 2nd March 2013, 01:15 AM   #12
diyAudio Member
 
Join Date: Nov 2012
Hey Perry i took a picture of what my ic's look like near the rca jacks im trying to figure out which chip is the vca theres 3 8 pin ics in the area and was wonder if you could assist me with which pins to jumper the 1k resistor at ?
  Reply With Quote
Old 2nd March 2013, 01:17 AM   #13
diyAudio Member
 
Join Date: Nov 2012
Heres the pic of the inside of my MTX 1000D
Attached Images
File Type: jpg MTX1000d.jpg (634.6 KB, 53 views)
  Reply With Quote
Old 2nd March 2013, 01:52 AM   #14
diyAudio Member
 
Join Date: Nov 2003
Location: Louisiana
'Inline' 8 pin. It appears to be U141.
  Reply With Quote
Old 2nd March 2013, 01:56 AM   #15
diyAudio Member
 
Join Date: Nov 2012
U141 remove ? its a long chip i was thinking it was one of the smaller 8 pins
  Reply With Quote
Old 2nd March 2013, 02:30 AM   #16
diyAudio Member
 
Join Date: Nov 2012
It appears both ics are inline with U141 will i have to remove both of them? and use 2 1k resistors?
Attached Images
File Type: jpg MTX1000d2.jpg (635.2 KB, 48 views)
  Reply With Quote
Old 2nd March 2013, 02:37 AM   #17
diyAudio Member
 
Join Date: Nov 2003
Location: Louisiana
Why do you need 2 resistors? Re-read the earlier post.

The resistor will go from one arrow to the other. U141 is the 8-pin inline IC.
Attached Images
File Type: jpg P4270037x.jpg (562.5 KB, 47 views)
  Reply With Quote
Old 2nd March 2013, 02:42 AM   #18
diyAudio Member
 
Join Date: Nov 2012
Awesome i was looking at the wrong ic's the one you have in the picture was my first thought thanks Perry ill remove that IC and place the resistor between the arrows you have marked in the picture you sent me
  Reply With Quote
Old 2nd March 2013, 04:24 AM   #19
diyAudio Member
 
Join Date: Nov 2012
so i jumpered the resistor removed the ic and im getting feed back noise like a cb rabio would have when trying to tune into a station and no sound
  Reply With Quote
Old 2nd March 2013, 02:02 PM   #20
diyAudio Member
 
Join Date: Nov 2003
Location: Louisiana
Post a photo of what you've done.

Are you 100% sure that there are no solder bridges between pads that you desoldered? Confirm with a multimeter.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help me fix my MTX 1000D, no sound, just static hakentt Car Audio 13 30th October 2009 04:33 AM
mtx 4250 problem firemedicsafd Car Audio 7 12th August 2009 07:34 PM
MTX 8302 problem damage Car Audio 46 27th October 2008 04:53 AM
mtx mxa8001 problem BEEFKING9 Car Audio 10 4th August 2008 01:14 AM
mtx amp problem [[help!!]] fuzzypinkhat45 Car Audio 3 8th July 2008 05:34 AM


New To Site? Need Help?

All times are GMT. The time now is 05:17 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2