Go Back   Home > Forums > General Interest > Car Audio

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 4th February 2013, 07:25 PM   #1
diyAudio Member
 
seankane's Avatar
 
Join Date: May 2010
Location: Washington State
Default Hifonics BXi2006D

Replaced power supply all is well with that.

Replaced all outputs as there were many shorted. Amp worked great.

Let the amp sit for a few months, was gonna sell it so I powered it up and it drew 20 amps current then subsided and worked fine.

I know thats not right so I let it sit overnight and powered it up this morning, drew 20 amps of current and blew every output.

I think I have an issue with the audio driver board?
__________________
Pyramid 52 Amp Power Supply----Fluke 787 Processmeter----Tektronix 465 Scope----Velleman HPS40 Scope----Soldering Iron----Desoldering Iron----Hejet HJ 500-S Heatgun----DM4070 Digital LCR Meter----Propane Torch
  Reply With Quote
Old 5th February 2013, 01:47 AM   #2
diyAudio Member
 
Join Date: Nov 2003
Location: Louisiana
Did it really blow EVERY output or just one from each group of outputs?
  Reply With Quote
Old 5th February 2013, 03:54 AM   #3
diyAudio Member
 
seankane's Avatar
 
Join Date: May 2010
Location: Washington State
It blew 1 from each group on one side of the amp.

I removed them and re powered the amp and it blew the rest from that side.

I removed them and re powered the amp and blew several on the other side.

I dont know whats going on this amp worked great, played it on the bench for hours. Let it sit for awhile and now this??
__________________
Pyramid 52 Amp Power Supply----Fluke 787 Processmeter----Tektronix 465 Scope----Velleman HPS40 Scope----Soldering Iron----Desoldering Iron----Hejet HJ 500-S Heatgun----DM4070 Digital LCR Meter----Propane Torch
  Reply With Quote
Old 5th February 2013, 04:15 AM   #4
diyAudio Member
 
Join Date: Nov 2003
Location: Louisiana
If this is one that you removed before you started using chipquik, it could have an intermittent connection due to a damaged via.
  Reply With Quote
Old 5th February 2013, 04:33 AM   #5
diyAudio Member
 
seankane's Avatar
 
Join Date: May 2010
Location: Washington State
No its not but it was worked on before, and looks like the driver board was removed previously, as I see some work done on it.

I guess I will take it out and check it out.
__________________
Pyramid 52 Amp Power Supply----Fluke 787 Processmeter----Tektronix 465 Scope----Velleman HPS40 Scope----Soldering Iron----Desoldering Iron----Hejet HJ 500-S Heatgun----DM4070 Digital LCR Meter----Propane Torch
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hifonics Brutus BXi2006D seankane Car Audio 7 20th December 2012 08:28 AM
Hifonics BXi2006d not coming out of protect. Any advice? RRR37 Class D 7 6th July 2011 03:35 AM
Bxi2006d repair help RRR37 Car Audio 4 5th July 2011 02:25 AM
Looking for a module for Hifonics BXi2006D luv2bass2 Class D 0 8th May 2010 07:21 AM
Hifonics BXi2006D Brutus! Formas Class D 0 30th August 2009 05:25 AM


New To Site? Need Help?

All times are GMT. The time now is 09:45 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2