Part for Punch 75 HD - diyAudio
Go Back   Home > Forums > General Interest > Car Audio
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 6th January 2013, 08:00 PM   #1
dwvinky is offline dwvinky  United States
diyAudio Member
Join Date: Jan 2013
Default Part for Punch 75 HD

Just recently picked up a 75 HD Mosfet from the early 90s. One channel is significantly louder than the other. There is a hybrid module labeled HB-PIM that appears to have been hot at some point. It appears to be a preamp board. Has 3 op amps, couple of caps, and a handful of resistors. Some of the traces were burnt open. Repaired them and now amp is whining on channel that was previously low. Amplitude is now equal. There was a missing cap that the previous owner had just jumpered across. I'm assuming the whine is caused by too much gain probably caused by the shorted out cap. Anyway, anyone know where i could source a replacement module?
  Reply With Quote
Old 6th January 2013, 08:15 PM   #2
diyAudio Member
seankane's Avatar
Join Date: May 2010
Location: Washington State
The little aluminum caps leaked on those boards, eating up the traces. The boards are extremely difficult to repair. Once the fluid gets on the boards, in most cases they are junk. I have replacements. PM me and we can discuss price, payment, and shipping.
Pyramid 52 Amp Power Supply----Fluke 787 Processmeter----Tektronix 465 Scope----Velleman HPS40 Scope----Soldering Iron----Desoldering Iron----Hejet HJ 500-S Heatgun----DM4070 Digital LCR Meter----Propane Torch
  Reply With Quote
Old 6th January 2013, 08:58 PM   #3
dwvinky is offline dwvinky  United States
diyAudio Member
Join Date: Jan 2013
P.M. sent.
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Rockford osgate Punch 150 HD mike49504 Car Audio 1 19th May 2012 08:52 PM
PUNCH 45 2ND GEN NON HD seankane Car Audio 4 22nd November 2011 12:57 AM
rockford punch 75 hd mike49504 Car Audio 10 16th November 2010 06:36 PM
Selling a punch 250a2, old punch 75, and ppi epx 205 on EBAY ppia600 Swap Meet 0 23rd February 2008 01:17 AM
Rockford Punch 75 (non HD) Clipped Car Audio 8 18th October 2007 10:56 AM

New To Site? Need Help?

All times are GMT. The time now is 12:42 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2