Soundstream Rubicon 604

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
The clip leds are shunted/switched by a MPS8599 transistor that gets it signal from the FEB modules. The transistor shunts across the led and it base is driven from one of the FEB's outputs. Check Q101, Q102, Q122, and Q123 for proper operation.
The rails should be as below:
P. S. RAILS: HV: +/- 29.5V
HC: +/- 23V
RB: +/- 18V

Hope some of this info is helpful...
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.