diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Car Audio (http://www.diyaudio.com/forums/car-audio/)
-   -   Alpine MRV-1507 (http://www.diyaudio.com/forums/car-audio/226275-alpine-mrv-1507-a.html)

seankane 23rd December 2012 05:58 AM

Alpine MRV-1507
 
I read mike49504's post but couldnt find a burned trace at least not yet??

Same issue, channel 1 plays and channel 2 is dead. When I switch the 0/180 channel 2 plays and channel 1 is dead.

mike49504 or anyone know where this broken trace could be?

Perry Babin 23rd December 2012 02:30 PM

Do you have audio on pins 2 and 8 of IC401?

If you operate all of the other switches through their entire range, does audio ever play through the dead channel?

seankane 27th December 2012 04:00 AM

Alpine MRV-1507
 
Got this amp for repair.

Powers up green then power LED flashes on and off red.
Music light is green.
Protetion light is amber or red.

There is no voltage on the gates of the IRFZ48 p/s fets.

There is no rail voltage coming from the rectifiers.

Pic#1 power supply
Pic#2 output stage

Any ideas?

seankane 27th December 2012 04:02 AM

Quote:

Originally Posted by Perry Babin (Post 3296486)
Do you have audio on pins 2 and 8 of IC401?

If you operate all of the other switches through their entire range, does audio ever play through the dead channel?

Im sorry Perry this amp is a MRV-1505. Same same? Still need the same info?

seankane 27th December 2012 05:10 AM

I made 2 different post and somehow this became one post??

I dont get it??

I want to focus on the MRV-1507 that I posted the 2 pics of. I will start a new thread on the MRV-1505.

seankane 27th December 2012 06:58 AM

Disregard ALL posts except post #3. Please read post #3 and we can go from there.

Perry Babin 27th December 2012 05:54 PM

What happened from post 1 to post 3? The amp was initially playing. Is it now not playing?

seankane 27th December 2012 06:09 PM

2 Attachment(s)
No these are 2 different amps. The original post was suppose be for a MRV-1505 but I screwed up and called it a MRV-1507.

When I made the post on the MRV-1507 (#3) somehow the seperate post became one post? I dont know?

The MRV-1505 has the issue with each channel working and not working when the 0/180 phase switch is switched and the MRV-1507 has the issues from post #3.

I asked a moderator to delete the posts, but they said they would have to delete the whole thread. So I figured we could just start from post #3 and focus on the MRV-1507.

Pic#1 power supply
Pic#2 output stage

Perry Babin 27th December 2012 06:37 PM

If you disconnect the 6 pin connector from the board, does the power supply power up?

seankane 27th December 2012 07:25 PM

No the power and the protection light are flashing red.


All times are GMT. The time now is 02:06 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2