The reference design/demo board from IR lists this diode as a 600v 1A fast recovery diode and lists the MURS120DICT-ND specifically. The MURS160 would likely be the right part because the 120 is a 200v diode.
The driver board I have here (DWM3640 - similar to the 4-IC board) has an SMA package diode. The MURS160 is in an SMB package which is a bit wider.
The US1J is in the SMA package and may be a better fit on the driver boards.
Bear in mind that I've never had to buy replacements for these so I don't know if the components listed here will work.
The driver board I have here (DWM3640 - similar to the 4-IC board) has an SMA package diode. The MURS160 is in an SMB package which is a bit wider.
The US1J is in the SMA package and may be a better fit on the driver boards.
Bear in mind that I've never had to buy replacements for these so I don't know if the components listed here will work.
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- General Interest
- Car Audio
- Hifonics XX-Cyclops