Sound Stream Class A 5.2

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I bought this amp a few years ago as part of a package deal. I hooked it up before purchase and it worked, but as soon as I tried to use it for real it popped 4 mosfets on the input side. Included are some pics of the board and of the blow mosfet, does anyone know a good place to buy them? This is a gorgeous amp and I would love to get it going again.
 

Attachments

  • 2012-11-12_19-54-59_4.jpg
    2012-11-12_19-54-59_4.jpg
    676.2 KB · Views: 67
  • 2012-11-12_20-42-37_206.jpg
    2012-11-12_20-42-37_206.jpg
    330.2 KB · Views: 61
  • 2012-11-12_20-42-53_315.jpg
    2012-11-12_20-42-53_315.jpg
    346.4 KB · Views: 55
In the first pick are those the diver transistors, and in the second pic are those the gate resistors? What I think are the gate resistors are also a little burnt looking but I can't seem to find them on the net to find out what they are.
 

Attachments

  • 2012-11-13_16-22-22_968.jpg
    2012-11-13_16-22-22_968.jpg
    748 KB · Views: 61
  • 2012-11-13_16-19-57_715.jpg
    2012-11-13_16-19-57_715.jpg
    555.3 KB · Views: 56
I found a resistor that may be a problem, it is the one closest to the edge of the board. It seems to have a hot spot on one of the gold strips as shown in the picture. To power it up I should re mount the board to the heat sink right?
 

Attachments

  • 2012-11-13_22-52-17_748.jpg
    2012-11-13_22-52-17_748.jpg
    361.1 KB · Views: 31
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.