Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Rockford Fosgate Punch 60 IX
Rockford Fosgate Punch 60 IX
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 26th October 2012, 01:04 PM   #1
S Merlington is offline S Merlington  United States
diyAudio Member
 
Join Date: Jun 2012
Default Rockford Fosgate Punch 60 IX

This amp uses IRFZ40's as the power supply fets Can i switch them to the Z44's?


Also does anyone know the value of the gate resistos ( R31,R32) ?
  Reply With Quote
Old 26th October 2012, 07:44 PM   #2
Perry Babin is offline Perry Babin  United States
diyAudio Member
 
Join Date: Nov 2003
Location: Louisiana
The originals were 100 ohms according to the diagram. I'd go with 47 ohm resistors and 3205s.
  Reply With Quote
Old 26th October 2012, 08:00 PM   #3
seankane is offline seankane  United States
diyAudio Member
 
seankane's Avatar
 
Join Date: May 2010
Location: Washington State
I agree with Perry I would also change Q2, Q3, Q4, Q5 the driver transistors for the power supply.

Sometimes the 1N5336B's will short when the power supply goes they are D4 and D5 you can remove them from the circuit and power up the amp safely only if they are shorted and the amp wont power up.

Also check all the 10uf 16v aluminum caps on the board good chance some are leaky, and check the 2200uf 35v rail caps they can leak also "sometimes".

Good Luck!!!!
__________________
Pyramid 52 Amp Power Supply----Fluke 787 Processmeter----Tektronix 465 Scope----Velleman HPS40 Scope----Soldering Iron----Desoldering Iron----Hejet HJ 500-S Heatgun----DM4070 Digital LCR Meter----Propane Torch
  Reply With Quote

Reply


Rockford Fosgate Punch 60 IXHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Rockford Fosgate Punch 200 IX S Merlington Car Audio 15 2nd September 2012 05:13 AM
punch 60 ix amp Q7 and Q8 are blown superjoey01 Car Audio 83 14th July 2011 08:14 PM
rockford fosgate punch z stevena2006 Car Audio 2 23rd December 2009 04:20 PM
Worth repairing a Rockford Fosgate Punch 60.2? wpc Car Audio 14 1st July 2009 06:25 PM


New To Site? Need Help?

All times are GMT. The time now is 05:18 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki