diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Car Audio (http://www.diyaudio.com/forums/car-audio/)
-   -   sound stream (http://www.diyaudio.com/forums/car-audio/221270-sound-stream.html)

ian33 10th October 2012 01:47 AM

sound stream
 
Hi all

I am working on a sound stream amp the cover is missing so i dont no the model.It look exactly like a spl fx1-5500d i had here last week.It has the exact same board.This amp came in with one rail cap with a split at the top.I replace it but am not getting good negative rail. +75.23v and -27.38v.I pull center leg on the - rectifier and i get 77.23v on it.Any help will be good.

ian33 10th October 2012 01:57 AM

No excessive current and nothing is geting hot.

Perry Babin 10th October 2012 09:25 AM

Does the rail voltage become balanced if you place the black probe on the secondary center-tap (rectifier in the circuit)?

Post a photo of the board or a link to a photo of the identical board if you posted one in your other thread.

ian33 12th October 2012 02:30 AM

3 Attachment(s)
yes amp about 47.26 on both rails when i used center- tap for ground point.
The 15v -reg is bad am geting 5v out from it.I will change it and repost later.


All times are GMT. The time now is 07:50 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2