thinking of making a box for a 2 inch mini sub? - diyAudio
Go Back   Home > Forums > General Interest > Car Audio

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 24th September 2012, 09:52 PM   #1
diyAudio Member
 
Join Date: Sep 2012
Default thinking of making a box for a 2 inch mini sub?

I want to attempt making a ported box for my super tough mini 2 inch sub
but i'm not sure what kind of box it would need because it's so small
i'm not planning on blowing any speakers but I want to see how much bass my little 2 inch speaker can do in a ported box
I was thinking of making a box for it and then putting the little speaker on top of the port of my 12 inch subwoofer box to see if I can get more bass out of my little mini sub
it says 3 watts and 4 ohms so I was going to ask exactly how much power it can handle since I ran a few tests with my car stereo on it
it easily runs fine at max volume and max bass for 10 minutes just fine it doesn't even bottom out and I'm sure my car stereo is MUCH more than 3 watts
so I was wondering what kind of box I could make for my super mini 2 inch sub?
should it be a regular super mini ported box or a super mini t line?
it's not a joke really I just want to see what kind of box I can make for my super mini sub?
  Reply With Quote
Old 25th September 2012, 02:54 AM   #2
diyAudio Member
 
Join Date: Nov 2003
Location: Louisiana
If you have a relatively large ported enclosure, try placing it near the port and move it closer. Does it produce significant bass? This worked relatively well with an enclosure that had three 4" ports. We placed a 4" driver near one of the ports and is produced much more bass than we expected.

Do not power the 12 in the enclosure.

It's going to be difficult to suggest an enclosure without knowing the T/S parameters of the speaker.

Have you searched for other sites (google) to see if anyone else has experimented with this speaker?
  Reply With Quote
Old 25th September 2012, 03:04 AM   #3
diyAudio Member
 
Join Date: Sep 2012
ok I know I'm not going to power the 12 and the sub at the same time. I was going to power the little speaker by itself.
and I'll try that with the port and the little speaker
and I have no clue what the specs of the little mini sub are because since I took it out of a desktop usb powered speaker setup.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Thinking of Making A Chassis from Clear Acrylic. Thoughts? MadHattter Chip Amps 18 22nd November 2011 09:09 PM
first build, thinking of mini Fonken igorb1 Full Range 0 22nd May 2008 12:01 PM
thinking about: 2 Peerless XXLS 10's in sealed box with Dayton rack mount amp? cava Subwoofers 6 14th September 2007 04:26 PM
Thinking up different ways to cover a very large box elambert Subwoofers 15 27th August 2005 02:51 PM
Thinking of making DIY amp forum... Solid Snake Solid State 3 20th August 2003 07:34 PM


New To Site? Need Help?

All times are GMT. The time now is 02:14 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2