Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

sg3525an: need help desining test circuit
sg3525an: need help desining test circuit
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 9th October 2012, 11:10 AM   #11
Perry Babin is offline Perry Babin  United States
diyAudio Member
 
Join Date: Nov 2003
Location: Louisiana
The datasheet should give you a logic table for the AND gate.

Most ICs change state when the clock pulses. Instead of trying to see this with a high frequency clock, use a momentary switch to pulse the clock input. You will likely have to install a small capacitor across the switch to prevent false triggering.
  Reply With Quote
Old 9th October 2012, 11:40 AM   #12
palstanturhin is offline palstanturhin  Finland
diyAudio Member
 
palstanturhin's Avatar
 
Join Date: Jun 2011
4017 is good.
CMOS version of it gives totempole output - which is good.
Check for its speed - will it be fast enough for you?

Drive an AND-gate (ex. 4081) with the output from 4017 and with the output from your 3525.
AND-gate then gives you the PWM signal you need.

Check for their speeds first!
  Reply With Quote

Reply


sg3525an: need help desining test circuitHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Need help DeSiNiNg 8'' SUB box. harp mg Subwoofers 7 31st May 2011 07:36 PM
PGA 2311 Test Circuit HarryK Chip Amps 13 15th March 2011 09:42 AM
Need a circuit to noise test BJTs Henry8 Solid State 12 20th December 2010 02:01 PM
Tube aging, in-circuit test? Skorpio Tubes / Valves 5 27th September 2010 09:11 PM
sg3525an PWM chip IMPALAMAN1 Car Audio 8 3rd June 2006 01:41 AM


New To Site? Need Help?

All times are GMT. The time now is 03:11 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki