Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|1st August 2012, 11:28 PM||#1|
Join Date: Aug 2012
need help with u1620,irf540 irf9540 n505hd 337t
i am new to this, my fosgate 250a2 wend bad, first was lack of power- like it was running on 100 watts then it got real load and i had to turn down the bass boost, then all it did is make the speaker go thug thug thug.
I removed the amp in the trunk when it was 105* outside and the amp was vary vary hot. I opened it up and everything looks good.
I have a ohm meter testing=
on 5no5hd leg 3 to 1 I get no reading on both chips.
on u1620 leg 1 and leg 3 I get vary vary low ohm's
on irf9540 and irf540 leg 1 to 2 and leg 2 to 3 I get no readings for ohm's.
there are 2 chips 1 per side of each.
so what am i looking for when i test with the ohm's meter on theses chips?
and are there any substitutes chips for 5n05hd and u1620?
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Irf540/irf9540 Amplifiers Schematic Collection||zox2003||Solid State||30||16th June 2012 04:02 PM|
|IRF540/IRF9540 bias||bogdan_borko||Solid State||34||17th May 2008 01:35 AM|
|can irf540 +irf9540 be tested with dmm||homertooties||Solid State||2||13th November 2006 07:19 PM|
|irf540 and irf9540 can these be tested with a dmm||homertooties||Parts||8||13th November 2006 11:36 AM|
|substitute for IRF9540/IRF540||elementx||Chip Amps||1||7th July 2006 06:09 PM|
|New To Site?||Need Help?|