need info mmats d300hc

[scorpidox]

Hi im pretty new to this. I have done basic repairs in this amp before such as mosfets and sound chip using this sites search for some of the basics. Recently the crossover control broke off and I can not find any supplier where I can find it and the only thing marked is b10k on the back. Could anyone lend me their assistance?

 

[Perry Babin]

Look at the dimensions for THIS pot. Does it match your pot?

 

[scorpidox]

I dont believe so, it looks like 15mm long also it is 12 pin all pointing straight down. Thank you for helping me ive been lost on trying to find a matching part.

 

[Perry Babin]

Sorry. I was looking at the wrong pot. What's the width of the body of the pot?

 

[scorpidox]

looks like it is 15mm also

 

[scorpidox]

Sorry actually going back and looking at some others I see I measured from the wrong place. looks to be a 10mm length 6mm diameter.

 

[scorpidox]

This is what was left.

 

[Perry Babin]

I don't see anything. Did you check with the manufacturer?

 

[scorpidox]

MMATS wasnt much help. There reply was we cant help you unless you send it to us.

 

[Perry Babin]

If you could find a single pot with the same design, you may be able to swap the boards out of four single pots into your pot.

There's also the option of replacing the pot with fixed resistors. It would make the crossover frequency fixed at one frequency but you could use the amp.

 

[scorpidox]

That is an excellent Idea, I like the way you think. I will try swapping the boards and let you know how it goes. thank you so much!