|
|||||||
| Home | Forums | Rules | Articles | diyAudio Store | Gallery | Wiki | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
6th July 2012, 07:53 PM
|
#1 |
|
diyAudio Member
Join Date: Jun 2012
|
Power Acoustic A3000DB
Anyone know the value of R101 it sits directly behind the rca jacks
|
|
|
6th July 2012, 08:03 PM
|
#2 |
|
diyAudio Member
Join Date: Nov 2003
Location: Louisiana
|
220 ohms.
This problem can be caused by a shorted transformer or by having the positive speaker output wire shorted to ground.
__________________
Links >> Basic Car Audio Amp Repair * Basic Car Audio Electronics * New Site * Basic Switching Power Supply Design * Basic Computer Skills << Links |
|
|
|
6th July 2012, 08:08 PM
|
#3 |
|
diyAudio Member
Join Date: Jun 2012
|
Would this also cause the amp not to power up?
|
|
|
|
6th July 2012, 08:10 PM
|
#4 |
|
diyAudio Member
Join Date: Nov 2003
Location: Louisiana
|
Not by itself but I've seen quite a few amps come in with this resistor burned and the SG3525 blown.
Post the DC voltage on all pins of the 3525 if you can't determine why it's not powering up. Pin 1: Pin 2: Pin 3: Pin 4: Pin 5: Pin 6: Pin 7: Pin 8: Pin 9: Pin 10: Pin 11: Pin 12: Pin 13: Pin 14: Pin 15: Pin 16:
__________________
Links >> Basic Car Audio Amp Repair * Basic Car Audio Electronics * New Site * Basic Switching Power Supply Design * Basic Computer Skills << Links |
|
|
|
6th July 2012, 08:19 PM
|
#5 |
|
diyAudio Member
Join Date: Jun 2012
|
Pin 1: 0
Pin 2: 0.50 Pin 3: 0 Pin 4: 0 Pin 5: 0.21 Pin 6: 0 Pin 7: 0.18 Pin 8: 0.73 Pin 9: 0.50 Pin 10: 0 Pin 11: 0 Pin 12: 0 Pin 13: 11.88 Pin 14: 0 Pin 15: 11.88 Pin 16:0.50 |
|
|
|
6th July 2012, 08:26 PM
|
#6 |
|
diyAudio Member
Join Date: Nov 2003
Location: Louisiana
|
The lack of 5v on pin 16 makes it appear to be defective. The problem could be the 3525 or something connected to pin 16 dragging the voltage down.
__________________
Links >> Basic Car Audio Amp Repair * Basic Car Audio Electronics * New Site * Basic Switching Power Supply Design * Basic Computer Skills << Links |
|
|
|
6th July 2012, 08:59 PM
|
#7 |
|
diyAudio Member
Join Date: Jun 2012
|
You were correct the 3525 was defective..
Thanks for your help.. |
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Help with Power Acoustik A3000db Repair | wccoug21 | Car Audio | 6 | 17th June 2012 08:17 PM |
| Power Acoustic SPL2600 | Dr Zeus | Car Audio | 5 | 23rd January 2011 08:42 PM |
| HHHHelp my For A3000DB!!!! | bass master | Class D | 5 | 7th December 2009 08:58 PM |
| I need service manual schematics poweracoustik A3000DB ! | bass master | Class D | 0 | 7th December 2009 02:40 PM |
| power acoustic amp | mike49504 | Car Audio | 1 | 5th January 2007 04:47 PM |
| New To Site? | Need Help? |
