Replacing 10x 160v caps on a Lanzar Opti4000D

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I am replacing 10 caps on my Lanzar Opti 4kD.

The specs on them are:
1200uf - 160v - TW85degC - 408k

Made by Luxon

After searching Mouser and RS Components I have only really managed to narrow it down to this:
Buy Aluminium TSHA Al electrolytic cap,1200uF 160V Panasonic ECOS2CA122DA online from RS for next day delivery.

They are £6.96 or $11 each, wow!

They are rated at 105degC and 5mm taller. Would these be a good replacement or should I be looking at something else?

Any help would be very much appreciated.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.