Kenwood KAC7202 - diyAudio
Go Back   Home > Forums > General Interest > Car Audio

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 28th April 2012, 08:41 PM   #1
diyAudio Member
 
Join Date: Sep 2006
Default Kenwood KAC7202

The rca shield ground connects to 1 end of a surface mount cap the other end connects to a resistor..


Is that resistor a 10K or does anyone know the value ?
  Reply With Quote
Old 28th April 2012, 08:59 PM   #2
diyAudio Member
 
Join Date: Dec 2005
Location: Northern California
Pm me I have the document if you need it...

I see 1k to the cap and then 10k after the cap

Last edited by 1moreamp; 28th April 2012 at 09:07 PM.
  Reply With Quote
Old 29th April 2012, 06:14 AM   #3
diyAudio Member
 
Join Date: Sep 2006
I just got the schematic from 1more amp.. But cant seem to find the part im looking for on the schematic..


The part is located on the bottom of the board not sure if its a diode or resistor but it connects to leg 1 of the D2012..



Its in the area marked 2 on the bottom of the board anyone know?
  Reply With Quote
Old 30th April 2012, 04:39 AM   #4
diyAudio Member
 
Join Date: Nov 2003
Location: Louisiana
You need to include the circuit board designations for every part that you're referring to.
  Reply With Quote
Old 5th May 2012, 03:18 AM   #5
diyAudio Member
 
Join Date: Sep 2006
This is the part im refering to anyone know what it is and the value ?
Attached Images
File Type: jpg Kenwood.JPG (550.9 KB, 39 views)
  Reply With Quote
Old 5th May 2012, 04:29 AM   #6
diyAudio Member
 
Join Date: Dec 2005
Location: Northern California
It looks like D3 and it connects to Q1 which is a +15 volt rail pass regulator and the part number is 02DZ16F-Y Zener Diode ...
  Reply With Quote
Old 5th May 2012, 04:32 AM   #7
diyAudio Member
 
Join Date: Nov 2003
Location: Louisiana
It appears to be D3. Likely a 16v zener diode from the part number (page 13 of the service manual).
  Reply With Quote
Old 5th May 2012, 12:47 PM   #8
diyAudio Member
 
Join Date: Sep 2006
Would that cuase the amp to draw excessive current?
  Reply With Quote
Old 7th May 2012, 03:03 AM   #9
diyAudio Member
 
Join Date: Nov 2003
Location: Louisiana
Many things could cause excessive current draw. Have you check the bias?

Have you checked the DC voltage (down to the millivolt) across the emitter resistors (limiter inline) to see if one channel had more current flowing through the outputs than the others?
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Kenwood 923 mike49504 Car Audio 5 14th March 2010 01:36 AM
Kenwood lovers take a look gain wire Analogue Source 4 16th December 2009 12:46 AM
Kenwood 9102 mike49504 Car Audio 38 16th November 2009 04:02 AM
Kenwood thunder Chip Amps 3 20th February 2007 11:58 AM
PLEASE! Kenwood help! mjarve Solid State 1 23rd September 2004 04:04 AM


New To Site? Need Help?

All times are GMT. The time now is 08:43 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2