Go Back   Home > Forums > General Interest > Car Audio

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 24th February 2012, 11:09 PM   #1
diyAudio Member
 
HSFDFIREMAN671's Avatar
 
Join Date: Feb 2012
Location: deatsville al
Default kicker 1000.1 no output

i have a kicker 1000.1 it turns on great good click on the relay....then there is no sound i have two power acoustik mofo 12" running at two ohms...they were working great and then just died????good ground 14.3 at the amp....i looked inside nothing is burnt.....
  Reply With Quote
Old 24th February 2012, 11:31 PM   #2
diyAudio Member
 
Join Date: Nov 2003
Location: Louisiana
Have you confirmed that the speakers are OK?

Have you tried connecting another speaker to the speaker terminals to see if it would play?
  Reply With Quote
Old 24th February 2012, 11:34 PM   #3
diyAudio Member
 
HSFDFIREMAN671's Avatar
 
Join Date: Feb 2012
Location: deatsville al
yes sir i have put the amp in my other truck on another set of speakers and still nothing???
  Reply With Quote
Old 25th February 2012, 12:05 AM   #4
diyAudio Member
 
Join Date: Nov 2003
Location: Louisiana
Do you have a multimeter?
  Reply With Quote
Old 25th February 2012, 12:08 AM   #5
diyAudio Member
 
HSFDFIREMAN671's Avatar
 
Join Date: Feb 2012
Location: deatsville al
i do have a bluepoint muiltmeter
  Reply With Quote
Old 25th February 2012, 01:29 AM   #6
diyAudio Member
 
HSFDFIREMAN671's Avatar
 
Join Date: Feb 2012
Location: deatsville al
or a fluke witch ever is best
  Reply With Quote
Old 25th February 2012, 11:34 AM   #7
diyAudio Member
 
Join Date: Nov 2003
Location: Louisiana
There are 4 rectifiers clamped to the heatsink. They include D30 and D24 and the two between those.

With the amp powered up with all components clamped tightly to the heatsink and a 15 amp fuse in the B+ line feeding the amp, measure the DC voltage on the center legs of those 4 components. Do NOT allow your meter probe to short to the clamp when you're doing this.

Post the voltage for each rectifier.
  Reply With Quote
Old 25th February 2012, 01:18 PM   #8
diyAudio Member
 
HSFDFIREMAN671's Avatar
 
Join Date: Feb 2012
Location: deatsville al
ok give me about 30 mins and i will have a chance to do it thanks
  Reply With Quote
Old 25th February 2012, 02:11 PM   #9
diyAudio Member
 
HSFDFIREMAN671's Avatar
 
Join Date: Feb 2012
Location: deatsville al
d24= .26v

d22= .28v

i see d22 and d24 then it goes to q106 q108 q105??? i dont see d30
  Reply With Quote
Old 25th February 2012, 04:27 PM   #10
diyAudio Member
 
Join Date: Nov 2003
Location: Louisiana
Post a photo of the are around these rectifiers in your amp.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
kicker zx1500.1 output inductor? shane300zx Car Audio 9 2nd August 2011 08:58 AM
orion hcca250r, kicker zr 1000, mmats d800.2, mtx 6500d, mtx 942, rockford punch 45, ernie cosillos Swap Meet 3 12th February 2011 11:14 AM
kicker zr 1000 (module?) ernie cosillos Car Audio 16 21st October 2010 05:55 PM
kicker 352xi resistors across output burned, what resistance? ppia600 Car Audio 2 19th August 2007 02:45 AM


New To Site? Need Help?

All times are GMT. The time now is 10:27 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2