When i opend the amp up i noticed 2 mylar caps broken off the board..
I side of the cap goes to the output filter inductor the other side goes thru a resistor then to the speaker output terminals..
Wondering if i can switch them over to a regular non polarized cap ??
The markings on the cap are 475K 63 volts..
I side of the cap goes to the output filter inductor the other side goes thru a resistor then to the speaker output terminals..
Wondering if i can switch them over to a regular non polarized cap ??
The markings on the cap are 475K 63 volts..
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.