Rockford Fosgate T5002

[mike49504]

I got one of theese in for repair..

The guy says that if he turns the gain up at all the amp will go into protection mode ..


Any ideas?

 

[timwebb]

with a load on it?

 

[mike49504]

Ok i just looked at this amp ..


I found 1 problem already there is 38 volts of rail on the left channels output.


2nd thing is someone has messed with this before ..


The outputs that are in it dont look right to me but maybe im wrong..


The outputs that are in it now are FQA36P15 and FQA46N15


Does anyone know if theese are the correct outputs??

 

[timwebb]

those are the ones i have in mine

 

[mike49504]

Ok Thanks I just removed the Mesha board for the left channel I will test the outputs and see if any are leaking..

 

[mike49504]

Just tested the outputs all test fine for the left channel..


Any ideas where to check next since i have 38 volts on the output termianls for the left channel ?

 

[mike49504]

Ok nevermind I found the problem and fixed it...

 

[seankane]

What was the problem?

 

[mike49504]

Bad solder joints on some of the smd transistors