diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Car Audio (http://www.diyaudio.com/forums/car-audio/)
-   -   DHD AMP -NTX 3107 parts info (http://www.diyaudio.com/forums/car-audio/204987-dhd-amp-ntx-3107-parts-info.html)

ian33 21st January 2012 02:50 PM

DHD AMP -NTX 3107 parts info
 
2 Attachment(s)
hi all

Am trying to find out the vlaue of a resistor (RP18).It is connected to the first leg of A1220A-y transistor(QP5) and the center leg of c2316 transistor(QP3) This is in the power supply.THis amp came in with capacitor (c2) and resistor RP18 burnt.

Perry Babin 21st January 2012 04:13 PM

If one end connects to the B+ terminal of the amp and the collector of the 1220 connects to pin 11/12 of the 494, it's likely 4.7 ohms.

ian33 21st January 2012 11:48 PM

I put in a 4.7 resistor and i replace the cap.Amp power up and plays good audio.The power supply FET (FQP50n06) have 0.5v on the gate leg,is that normal? Isn't it suposed to be about 4.*v?

Perry Babin 22nd January 2012 01:37 AM

If the supply is regulated, the voltage at the gates may be very low. As long as the rail voltage is correct and the voltage on pins 9/10 and the gates is close, it's likely OK.

ian33 23rd January 2012 12:52 AM

I run it at full power and it is working good

Thanks for the help


All times are GMT. The time now is 10:58 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2