Diamond D6 1000.1 R101 value

brandes.cm · 13th January 2012, 01:50 PM

Any one know the value of R101, it is sandwiched between two caps and two op-amps in the front end circuit. I will have to post a pic later if needed.

This amp is all leaded technology, nothing surface mount about it.

brandes.cm · 13th January 2012, 11:46 PM

The resistor is tied to left channel + RCA input. The right side goes to a cap.

timwebb · 13th January 2012, 11:56 PM

10 ohms

brandes.cm · 13th January 2012, 11:57 PM

Basing it off a Lightning Audio 1000, it would seem to be a 1K resistor. It also shares the same output driver module. "D1KDSUB"

brandes.cm · 13th January 2012, 11:57 PM

Thanks, Tim. You have one in the shop?

timwebb · 14th January 2012, 12:13 AM

yea. it dosent have a driver card

timwebb · 12:22 AM

i look again. i think its 22ohm. the board is dirty..ima upload a picture... to tired from work

timwebb · 14th January 2012, 12:23 AM

..

brandes.cm · 14th January 2012, 12:32 AM

Yes 22ohm.

Perry Babin · 14th January 2012, 05:00 AM

This sounds like it's the same as the Class D - Type 2 in the tutorial.

13th January 2012, 01:50 PM	#1
brandes.cm diyAudio Member Join Date: Sep 2009 Location: Wisconsin	Diamond D6 1000.1 R101 value Any one know the value of R101, it is sandwiched between two caps and two op-amps in the front end circuit. I will have to post a pic later if needed. This amp is all leaded technology, nothing surface mount about it.

14th January 2012, 12:16 AM	#7
timwebb diyAudio Member Join Date: Jan 2010 Location: memphis tn	i look again. i think its 22ohm. the board is dirty..ima upload a picture... to tired from work Last edited by timwebb; 14th January 2012 at 12:22 AM.

14th January 2012, 05:00 AM	#10
Perry Babin diyAudio Member Join Date: Nov 2003 Location: Louisiana	This sounds like it's the same as the Class D - Type 2 in the tutorial. __________________ Links >> Basic Car Audio Amp Repair * Basic Car Audio Electronics * New Site * Basic Switching Power Supply Design * Basic Computer Skills << Links

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Diamond Audio D6 1500.1 diagram	clayton	Car Audio	10	14th May 2012 01:46 PM
Diamond 1000 amp	mbates14	Car Audio	4	5th April 2010 03:54 AM
Wierd turn-on noise with my Diamond Audio d6 700.4	rc10mike	Car Audio	5	23rd January 2010 03:35 PM
Infinity Kappa Perfect vs. Diamond D6	chcc5th	Car Audio	1	7th May 2007 05:14 PM
Diamond Audio D6 1500.1 manual?	mbayaq579	Car Audio	2	8th March 2007 07:30 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

13th January 2012, 11:56 PM	#3
timwebb diyAudio Member Join Date: Jan 2010 Location: memphis tn	10 ohms

13th January 2012, 11:57 PM	#4
brandes.cm diyAudio Member Join Date: Sep 2009 Location: Wisconsin	Basing it off a Lightning Audio 1000, it would seem to be a 1K resistor. It also shares the same output driver module. "D1KDSUB"

14th January 2012, 12:13 AM	#6
timwebb diyAudio Member Join Date: Jan 2010 Location: memphis tn	yea. it dosent have a driver card

14th January 2012, 12:32 AM	#9
brandes.cm diyAudio Member Join Date: Sep 2009 Location: Wisconsin	Yes 22ohm.

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read