lanzar vibe 230 minor issues

[grandam88]

I recently bought a lanzar vibe 230 2 channel amplifier, it seems to work fine and sounds good. Just bought it because my HU leaves alot to be desired in the loudness department.

I have it connected in stereo mode @4ohms, I set my gain with a DMM to 14 volts for around 50watts of power to each speaker. I did this with a 1khz tone.

I set the gain off the right channel, but figured I would check the left also, the left channel is reading about 12.8-13volts while the rights reads about 14-14.5 volts AC.

I'm assuming this is abnormal, if it is, please tell me how to correct the issue, I also think this may be a side affect of being a cheaply made amp.

[Perry Babin]

That's OK. It's only about 1dB which is inaudible.