Im get 38 volts on the outputs of this amp..
I messed with the dc offset pots but it makes no difference ..
I also measured the resistance from the driverboard transistors to the legs as i did in a previous repair on a PPI PC21400 im getting 100 ohms from point a to point a and point b to point b..
All outputs are measuring good..
Any ideas on where to look next since i still have 38 volts on the output?
I messed with the dc offset pots but it makes no difference ..
I also measured the resistance from the driverboard transistors to the legs as i did in a previous repair on a PPI PC21400 im getting 100 ohms from point a to point a and point b to point b..
All outputs are measuring good..
Any ideas on where to look next since i still have 38 volts on the output?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.