|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
|
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
diyAudio Member
|
this unit have 3 flashes between power and protection with 1 second laps between the 3 flashes, there is no output transistor or ir2010 in the unit at this point, a picture is included. any sugestion?
thanks in advance.
__________________
fluke 50 mhz scope,35 amp power supply,0.5-12v adj power supply, fluke 179,hot air desolder gun, merit multyfuntion signal tracer/generator. |
|
|
|
|
#2 |
|
diyAudio Member
|
here is the picture
__________________
fluke 50 mhz scope,35 amp power supply,0.5-12v adj power supply, fluke 179,hot air desolder gun, merit multyfuntion signal tracer/generator. |
|
|
|
|
#3 |
|
diyAudio Member
Join Date: Nov 2003
Location: Louisiana
|
Look up the owner's manual. It shows the code for the flashes.
__________________
Links >> Basic Car Audio Amp Repair --- Basic Car Audio Electronics --- Basic Transistor Testing --- Basic Switching Power Supply Design --- Basic Computer Skills << Links |
|
|
|
|
#4 |
|
diyAudio Member
|
the 3 flashes means that the battery is bad, since I'm working
with a 12V 35amp power supply, I decide to look for loose power supply connection, and founded a loose transformer, tight up and the amp power came up, install all the output transistor, and the amp was playing OK for about 2 min, until I disconnected the remote cable, I heard a spark and all my output transistors went bad, any suggestion?
__________________
fluke 50 mhz scope,35 amp power supply,0.5-12v adj power supply, fluke 179,hot air desolder gun, merit multyfuntion signal tracer/generator. |
|
|
|
|
#5 |
|
diyAudio Member
Join Date: Jun 2010
Location: the caribbean
|
check for solder bridges
|
|
|
|
|
#6 |
|
diyAudio Member
|
Thank very much, solder the power connectors, and the area
and that did it.
__________________
fluke 50 mhz scope,35 amp power supply,0.5-12v adj power supply, fluke 179,hot air desolder gun, merit multyfuntion signal tracer/generator. |
|
|
|
|
#7 |
|
diyAudio Member
|
this amp got 54v on one channel, no shorted
output or drivers, the tl072 have the +15v at pin 8, and 6v at pin 4 instead of -15v any sugestions?
__________________
fluke 50 mhz scope,35 amp power supply,0.5-12v adj power supply, fluke 179,hot air desolder gun, merit multyfuntion signal tracer/generator. |
|
|
|
|
#8 |
|
diyAudio Member
|
sorry. wrong place. for this post.
__________________
fluke 50 mhz scope,35 amp power supply,0.5-12v adj power supply, fluke 179,hot air desolder gun, merit multyfuntion signal tracer/generator. |
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| stetsom 14k5 | megael9 | Car Audio | 4 | 12th August 2011 01:19 AM |
| stetsom 1k5 h | megael9 | Car Audio | 8 | 26th July 2011 01:03 AM |
| stetsom | megael9 | Car Audio | 27 | 4th July 2011 11:40 PM |
| New To Site? | Need Help? |
| Page generated in 0.09802 seconds (66.42% PHP - 33.58% MySQL) with 11 queries |