DHD NTX2960 - diyAudio
Go Back   Home > Forums > General Interest > Car Audio
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 14th October 2011, 02:26 PM   #1
diyAudio Member
Join Date: Jun 2010
Default DHD NTX2960

The pwm ic tl494 goes bad after one month.I have replace it three times.apart from the 494 i have never find any othe bad parts in the amp.when it goes bad i get 9v on almost all the pins of the 494.There is an othe small ic next to it 4558d this time i will replace them both to see what happen.Any idea what elce could cause the tl494 to just fail like that?
  Reply With Quote
Old 14th October 2011, 05:36 PM   #2
diyAudio Member
Join Date: Nov 2003
Location: Louisiana
If you have more than a few thousandths of a volt on pin 7, there is an open trace or a bad solder connection. That's the ground for the IC and will nearly always be connected directly to the amp ground.
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
dhd ntx 6211 burnt transistors ian33 Car Audio 0 27th April 2011 06:15 PM
DHD should repair? Solosound Car Audio 5 9th November 2008 07:39 PM

New To Site? Need Help?

All times are GMT. The time now is 04:25 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2