50n05e? ss1000s

[AKHeathen]

ok, another snafoo again.... i'm trying to cross this power supply fet, and can't even get an exact match, other than trying to sell me some (and i checked those sites for p-sheets) now, what close things i've been able to cross was rfp50n05L, and crosses as irL3705/irLz44n, or it can cross to irfz40?...... i guess the big question, is are they gate logic fets, or normal fets. i'm just trying to narrow that down to choose a replacement to upgrade. i was hoping just to throw some irf3205's in there. not sure if it matters to you, but the8 are driven by 3.3ohm, from a pair of a 1562, to the sg3524n ic...... thank you, i'm lost

[luka]

if car amp, then they are not logic level fets, and 3205 or similar would be great

[Perry Babin]

The NDP7060 would be the closest to the originals. The 3205s should work if you don't want to use the 7060.

[AKHeathen]

oh, sweet, the 7060's are what cane in my 500s's, which is great, since i know the 3205's are proven as an awesome upgrade to the under-built power supply section. you think the 1562 can handle running 4 of them with the 3.3ohm resistors, or should i bump them to 33, or 34's?

[Perry Babin]

I think the 1562 can handle it with the 3.3 ohm resistors. Using slightly higher value gate resistors would decrease the stress on the drivers but I don't think it's necessary.